Sony DVCAM DSR-PDX10 Operating Instructions Manual page 100

Dubbing a tape
Using the i.LINK cable
Simply connect the i.LINK cable (optional) to the
to DV IN on the DV products. With a digital-to-digital connection, video and audio
signals are transmitted in digital form for high-quality editing. You cannot dub the
titles, display indicators or the contents of cassette memory or letters on the "Memory
Stick" index screen.
(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert
(2) Prepare the VCR for recording, then set the input selector to LINE. Refer to the
(3) Set the POWER switch to VCR on your camcorder.
(4) Play back the recorded tape on your camcorder.
(5) Start recording on the VCR. Refer to the operating instructions of the VCR.
: Signal flow
When you have finished dubbing a tape
Press x on both your camcorder and the VCR.
You can connect one VCR only using the i.LINK cable
See page 241 for more information about i.LINK.
Pictures processed by the digital effect or PB ZOOM
These pictures are not output through the
If you record a playback pause picture with the DV Interface
The recorded picture becomes rough. Also, when you play back the picture using other
video equipment, the picture may jitter.
100
the recorded tape into your camcorder.
operating instructions of the VCR.
DV
DV Interface on your camcorder and
i. LINK cable (optional)
DV Interface.
DV
DV IN