Sony DVCAM DSR-PDX10 Operating Instructions Manual page 216

Changing the default settings with the menu
Icon/item
VCR SET
CH SELECT
AUDIO MIX
A/VtDV OUT
LCD/VF SET
LCD COLOR
VF B.L.
GUIDEFRAME
Notes on VF B.L.
• When you select BRIGHT, battery life is reduced by about 10 percent during
recording.
• When you use power supplies other than the battery pack, BRIGHT is automatically
selected.
Even if you adjust LCD COLOR and/or VF B.L.
The recorded picture will not be affected.
216
Mode Meaning
z CH1, CH2 To play back the CHs 1/2 audios from each
channel. However, if you play back the audios
via the camcorder's speaker, the audios are
mixed.
CH1 To play back the CH1 audio from both channels
1/2
CH2 To play back the CH2 audio from both channels
1/2
—— To adjust the balance between the channels 1/2
(CH1/2) and channel 3/4 (CH3/4) (p. 120)
z OFF To output digital images and sound in analog
format using your camcorder
ON To output analog images and sound in digital
format using your camcorder (p. 211)
—— To adjust the color on the LCD screen, turn the
SEL/PUSH EXEC dial
To get low-
intensity
z BRT NORMAL To set the brightness on the viewfinder screen to
normal
BRIGHT To brighten the viewfinder screen
z OFF
Does not display the guide frame.
ON Displays the guide frame (p. 63).
CH1 CH3
2 4
To get high-
intensity
POWER
switch
VCR
VCR
VCR
VCR
CAMERA
MEMORY
VCR
CAMERA
MEMORY
CAMERA
MEMORY