Sony DVCAM DSR-PDX10 Operating Instructions Manual page 191

Viewing images on your computer – Introduction
When connecting to a computer using the i.LINK (DV interface)
Your computer must have a DV connector and editing software installed that can read
video signals.
DV
DV connector
is marked on this side
i.LINK cable (optional)
Viewing images recorded on a "Memory Stick"
When connecting to a computer using the USB jack
There are two methods of USB connection, NORMAL and PTP. The default setting is
NORMAL. Here we explain how to use the camcorder with a standard USB connection
(NORMAL).
See page 193 when using Windows and page 208 when using Macintosh.
(USB) jack
USB connector
Push into the end
USB cable (supplied)
You can also use a Memory Stick Reader/Writer (optional).
When connecting to a computer without a USB jack
Use an optional floppy disk adaptor for a Memory Stick or a PC card adaptor for a
Memory Stick.
When purchasing an accessory, check its catalog beforehand for the recommended
operating environment.
191