Searching The Boundaries Of A Recorded Tape By Title - Title Search - Sony DVCAM DSR-PDX10 Operating Instructions Manual

Searching the boundaries of a recorded
tape by title – TITLE SEARCH
If you use a cassette with cassette memory, you can search for the boundaries of
a recorded tape by title
operation.
Before operation
Set CM SEARCH in
(1) Set the POWER switch to VCR.
(2) Press SEARCH MODE on the Remote Commander repeatedly until the TITLE
SEARCH indicator appears. The indicator changes as follows:
INDEX SEARCH t TITLE SEARCH t DATE SEARCH
(no indicator) T PHOTO SCAN T PHOTO SEARCH
(3) Press . or >
Your camcorder automatically starts playback of the scene having the title that
you selected.
2
TITLE SEARCH
1
SEARCH
2
MODE
3
4
5
6
3
. >
[a] Actual point you are trying to search for
[b] Present point on the tape
To stop searching
Press x.
If you use a cassette without cassette memory
You cannot superimpose or search a title.
If a tape has a blank portion between recorded portions
The title search may not work correctly.
To superimpose a title
See page 126.
(TITLE SEARCH) . Use the Remote Commander for this
to ON in the menu settings. (The default setting is ON.)
on the Remote Commander to select the title for playback.
SCENE1
SCENE2
SCENE3
SCENE4
SCENE5
SCENE6
TITLE SEARCH
3 SCENE3
4 SCENE4
5 SCENE5
6 SCENE6
7 SCENE7
8 SCENE8
[b] [a]
89