Sony DVCAM DSR-PDX10 Operating Instructions Manual page 109

Dubbing only desired scenes – Digital program editing (on tapes)
Operation 1: Making a program
(1) Insert the tape for playback into your camcorder, and insert a tape for
recording into the VCR.
(2) Press MENU, then turn the SEL/PUSH EXEC dial to set VIDEO EDIT in
TAPE, then press the dial. (p. 223)
(3) Search for the beginning of the first scene you want to insert using the video
operation buttons, then pause playback.
You can fine-adjust one frame at a time with EDITSEARCH.
(4) Press MARK on the Remote Commander, or turn the SEL/PUSH EXEC dial to
select MARK, then press the dial.
The IN point of the first program is set, and the top part of the program mark
changes to light blue.
(5) Search for the end of the first scene you want to insert using the video
operation buttons, then pause playback. You can fine-adjust one frame at a
time with EDITSEARCH.
(6) Press MARK on the Remote Commander, or the SEL/PUSH EXEC dial.
The OUT point of the first program is set, then the bottom part of the program
mark changes to light blue.
(7) Repeat steps 3 to 6, then set the program.
When the program is set, the program mark changes to light blue.
You can set up to 20 programs in maximum.
2
OTHERS
DATA CODE
BEEP
COMMANDER
DISPLAY
VIDEO EDIT
HRS METER
RETURN
[ MENU ] : END
4
VIDEO EDIT N X
MARK 1 OUT
UNDO
ERASE ALL
START
EDIT SET
TOTAL 0 : 00 : 00 : 00
SCENE 0
[ MENU ] : END
MENU
OTHERS
DATA CODE
BEEP
COMMANDER
DISPLAY
READY VIDEO EDIT
HRS METER
RETURN
[ MENU ] : END
6
00 : 08 : 55 : 06
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
EDIT SET
TOTAL 0 : 00 : 12 : 00
SCENE 1
[ MENU ] : END
VIDEO EDIT
MARK
UNDO
ERASE ALL
START
EDIT SET
RETURN
TAPE
TOTAL 0 : 00 : 00 : 00
MEMORY
SCENE 0
[ MENU ] : END
7
00 : 09 : 07 : 06
N X VIDEO EDIT
2 IN MARK
UNDO
ERASE ALL
START
EDIT SET
TOTAL 0 : 00 : 47 : 12
SCENE 3
[ MENU ] : END
to
00 : 08 : 55 : 06
1 IN
00 : 10 : 01 : 23
N X
4 IN
109