Sony DVCAM DSR-PDX10 Operating Instructions Manual page 24

Step 4 Using the touch panel
Notes
•When using the touch panel, press operation buttons with your thumb supporting the
LCD panel from the back side of it or press those buttons lightly with your index
finger.
•Do not press the LCD screen with sharp-pointed objects such as a pen.
•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You
can control the display with DISPLAY/TOUCH PANEL on your camcorder.
•When operation buttons do not work even if you press them, an adjustment is
required (CALIBRATION) (p. 246).
•When the LCD screen gets dirty, clean it with the supplied cleaning cloth.
When executing each item
The green bar appears above the item.
If the items are not available
The color of the items changes to gray.
Press FN to display the following buttons:
When the POWER switch is set to CAMERA
PAGE1
PAGE2
When the POWER switch is set to VCR
PAGE1
PAGE2
See page 138 when the POWER switch is set to MEMORY.
24
END SCH, SPOT FOCUS, DIG EFFT, MEM MIX, SPOT METER
LCD BRT, SELFTIMER
LCD BRT, PB, INDEX, END SCH
DIG EFFT, PB ZOOM, PB, INDEX, DATA CODE