Sony DVCAM DSR-PDX10 Operating Instructions Manual page 220

Changing the default settings with the menu
Icon/item
TAPE SET
REC MODE
AUDIO MODE
qREMAIN
MIC NR
MIC LEVEL
XLR SET
Note on REC MODE
You cannot dub any audio sound on a tape recorded in the DV format (SP mode), even
if you recorded it in Fs32K (12-bit) mode.
Notes on AUDIO MODE
•You cannot dub audio sound on a tape recorded in the Fs48K (16-bit) mode.
•When playing back a tape recorded in the Fs48K (16-bit) mode, you cannot adjust the
balance in AUDIO MIX.
Note on MIC NR
You cannot set MIC NR when audio sound is input via the MIC jack.
Note on XLR SET
XLR SET can be set only when the supplied XLR adaptor is installed.
220
Mode Meaning
z DVCAM To record in the DVCAM format
DV SP To record in the DV format (SP mode)
z FS32K To record in Fs32K (12-bit) mode (4-channel
sounds)
FS48K To record in Fs48K (16-bit) mode (2-channel
sounds with high quality)
z AUTO To display the remaining tape indicator:
• For about eight seconds after a cassette is
inserted and your camcorder calculates the
remaining amount of tape
• For about eight seconds after N or
DISPLAY/TOUCH PANEL is pressed
ON To always display the remaining tape indicator
z ON To reduce the drum noise via the microphone
OFF To deactivate the function above (p. 31)
z AUTO Adjusts audio recording level of the built-in
microphone automatically.
MANUAL Adjusts audio recording level of the built-in
microphone manually (p. 80).
—— Adjusts the audio recording level of the XLR
adaptor manually (p. 78).
POWER
switch
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA
VCR
CAMERA