Sony DVCAM DSR-PDX10 Operating Instructions Manual page 132

Labeling a cassette
To erase the label you have made
In step 4 turn the SEL/PUSH EXEC dial to select [ C ], then press the dial. The last
character is erased.
To change the label you have made
Insert the cassette to change the label, and operate in the same way to make a new label.
If you set the write-protect tab of the cassette to lock
You cannot label the tape. Slide the write-protect tab to release the write protection.
If the tape has too many index signals
You may not be able to label a cassette because the cassette memory becomes full. In
this case, delete data you do not need.
If you have superimposed titles in the cassette
When the label is displayed, up to four titles also appear.
When the "-----" indicator has fewer than 10 spaces
The cassette memory is full.
The "-----" indicates the number of characters you can select for the label.
To delete the title
Select [ P ]. The last character is erased.
To enter a space
Select [ Z& ? ! ], then select the blank part.
132