Sony DVCAM DSR-PDX10 Operating Instructions Manual page 147

Recording still images on a "Memory Stick"
– Memory Photo recording
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the further side (unlock position).
(2) Press MENU, then select BURST while STILL SET is selected in
the dial (p. 217).
(3) Turn the SEL/PUSH EXEC dial to select the desired setting, then press the
dial.
(4) Press MENU to make the menu setting disappear.
(5) Press PHOTO deeper.
If the capacity of the "Memory Stick" becomes full
" FULL" appears on the screen, and you cannot record a still image on this "Memory
Stick."
The number of still images in continuous shooting
The number of still images you can shoot continuously varies depending on the image
size and the capacity of the "Memory Stick."
During recording still images continuously
The flash (optional) does not work.
The effect of exposure bracketing (EXP BRKTG)
The effect may not appear clearly on the LCD screen.
Checking images on a TV monitor or computer display for the expected effect is
recommended.
When selecting NORMAL
Recording continues up to the maximum number of still images during pressing
PHOTO deeper. Release PHOTO to stop recording.
When shooting with the self-timer or the Remote Commander
Your camcorder automatically records up to the maximum recordable number of still
images.
If there is space remaining on the "Memory Stick" for less than three photos
You cannot carry out the exposure bracketing (EXP BRKTG). "
when you press PHOTO.
PHOTO
MENU
2
MEMORY SET
STILL SET
BURST OFF
QUALITY
IMAGESIZE
RETURN
[ MENU ] : END
3
MEMORY SET
STILL SET
BURST OFF
QUALITY NORMAL
IMAGESIZE EXP BRKTG
RETURN MULTI SCRN
[ MENU ] : END
, then press
MEMORY SET
STILL SET
BURST OFF
QUALITY NORMAL
IMAGESIZE EXP BRKTG
RETURN MULTI SCRN
[ MENU ] : END
MEMORY SET
STILL SET
BURST NORMAL
QUALITY
IMAGESIZE
RETURN
[ MENU ] : END
FULL" is displayed
147