KYMCO X-Town 300 ABS Service Manual page 264

21 . ANTI-LOCK BRAKE SYSTEM (ABS)
X-Town300 ABS
ABS ECU REMOVAL& INSTALLATION
The coupler is used for automobile's waterproof. Please take car of operation.
Please keep a good ventilating about ECU in order to prevent the ABS ECU from high temperature.
(一) Push upward (二) Take right out (三) Finished
ABS ECU & ABS Hydraulic Unit
ABS ECU & ABS Hydraulic unit
Remove the screws attaching to the Hydraulic Unit.
To install the sensor is in the reverse order of removal.
(1)Oil boltsX4 Torque: 35N.m(3.5kgf.m)
(2)Nutx2:8N.m (0.8 kgf.m)
＊
When replacing a new Hydraulic Unit, don't need to drain the brake fluid.
21-6