KYMCO X-Town 300 ABS Service Manual page 43

3. INSPECTION/ADJUSTMENT
X-Town300 ABS
ENGINE OIL
OIL LEVEL INSPECTION
Stop the engine and support the scooter
upright on the level ground.
Wait for 2～3 minutes and check the oil level
with the dipstick. Do not screw in the dipstick
when checking the oil level.
OIL CHANGE
Remove the oil drain bolt to drain the engine
oil.
Install the aluminum washer and tighten the
oil drain bolt.
Torque: 2.5 kg-m
＊
 Replace the aluminum washer with a
new one if it is deformed or damaged.
Pour the recommended oil through the oil
filler hole.
Oil Drain Bolt
OIL CAPACITY
Engine oil capacity: 1.1 L
Engine oil exchanging capacity: 0.9 L
Engine Oil Viscosity : SAE 5W50
OIL FILTER REPLACEMENT
Remove the oil filler cap attaching the
right-under crankcase cover.
Oil Drain Cap
Oil Strainer Screen
3-4