KYMCO X-Town 300 ABS Service Manual page 234

18. STARTING SYSTEM
STARTER MOTOR
REMOVAL
＊
Before removing the starter motor, turn
the ignition switch OFF and remove the
battery ground. Then, turn on the
ignition switch and push the starter
button to make sure the starter motor
can't operate securely.
Remove the seat, met-in box and carrier.
Remove the body cover, center cover and
rear fender A together.
Remove the nut goes to the starter relay and
relax cable band to disconnect the starter
motor cable.
Remove two start motor mounting bolts and
the motor.
18-3
X-Town300 ABS
Nut
Starter Motor Cable
Bolts