10. A.C. GENERATOR/STARTER CLUTCH
SERVICE INFORMATION
GENERAL INSTRUCTIONS
All operations and inspections in this section can be made with the engine installed.
Should drain the coolant before removing the right crankcase cover.
Be careful not to drain the coolant when the engine temperature is high. (Perform this operation
when the engine is cold.)
Drain the coolant into a clean container.
Drain the engine oil into a clean container before removing the right crankcase cover.
When the right crankcase cover is installed, fill with the recommended engine oil and coolant.
Remember to bleed air from the water hose.
SPECIFICATIONS
Engine oil: SAE 5W/50#
API-SJ above
Engine quality: Synthetic
Oil capacity at change: 1.1 Liter
Coolant capacity:
Radiator and Hose capacity:
Reserve tank capacity:
SPECIAL TOOLS
Flywheel puller
Flywheel holder
SPECIFICATIONS
Item
Starter driven gear I.D.
Starter driven gear O.D.
TORQUE VALUES
Flywheel nut :
TROUBLESHOOTING
Refer to chapter 1 for A.C. generator troubleshooting.
Starter motor rotates but engine does not start
Faulty starter clutch
Starter motor rotates reversely
Weak battery
E003
E021
Standard (mm)
22.026 (0.88104)~22.045
42.195 (1.6878)~42.208
5.5~6.5 kgf-m (58.8 N-m)
1.10 liter
0.25 liter
(0.8818)
(1.68832)
X-Town300 ABS
Service Limit (mm)
22.1 (0.884)
41.5 (1.66)
10-2