Table of Contents
Advertisement
LTF Time Of Flight Laser Distance Sensor Instruction Manual
See Factory Defaults for a list of sensor default settings.
Models with current or voltage analog outputs are available. This manual provides the display information and the navigation
paths for the current models with the voltage model text in parentheses if it is different.
Features and Indicators
Discrete Output
LED Indicator
Up and Down
Enter Button
Escape Button
Display
Buttons and Icons
Use the sensor buttons Down, Up, Enter, and Escape to program the sensor and to access sensor information.
6
Features
Analog Output
LED Indicator
Power
Display
LED Indicator
Buttons
shown in Run Mode
Down and Up Buttons
Press Down and Up to:
•
Access the Quick Menu from Run mode
•
Navigate the menu systems
•
Change programming settings
•
Change individual digit values in distance based settings
When navigating the menu systems, the menu items loop.
Three LED indicators provide an ongoing indication of the
sensing status.
Analog Output LED Indicator
Solid Amber = Displayed distance is within the taught
analog output window
Off = Displayed distance is outside the taught analog
output window
Power LED Indicator
Solid Green = Normal operation, power On and laser On
Flashing Green (1 Hz) = Power On and laser Off (laser
enable mode)
Discrete Output LED Indicator
Solid Amber = Discrete Output is On
Off = Discrete Output is Off
The display is a 2-line, 8-character LCD. The main screen is
the Run mode screen, which shows the real-time distance
measurement and the analog output measurement.
Continued on page 7
© Banner Engineering Corp.
June 22, 2023
Advertisement
Table of Contents
