Initially Starting, Configuring, and Checking System Operation
CAUTION! Performing various steps in the following procedures may cause a service interruption
and/or result in the extension of alarms. Notify any appropriate personnel before starting this procedure.
Also notify these personnel when this procedure is completed.
MCA (Meter, Control, Alarm Panel)
MCA Local Control Panel and Display
In the following procedures, all controls and indicators are located on the MCA Local Control Panel, unless
otherwise indicated. The MCA Local Control Panel is located on the front of the Primary Power/Distribution or
Power Only Bay. See Figure 106.
Vertiv™
| NetSure™ 802 Series -48 VDC Power System Installation Manual (Section 5876) | Rev. ZA
196