Table of Contents
Advertisement
Automatic programmes
en
A utomatic programmes
n
Y ou can prepare a wide range of food using the
A u t o m a t i c p r o g r a m m e s
automatic programmes. The appliance will choose the
optimal setting for you.
To achieve good results, the cooking compartment must
not be too hot for the type of food you have selected. If
it is, a message will appear on the display. Allow the
appliance to cool and then try again.
Information on the settings
▯
The cooking result depends on the quality of the
food and the size and type of cookware. For an
optimal cooking result, only use food that is in good
condition and meat that is chilled to refrigerator
temperature. For frozen food, only use food straight
out of the freezer.
▯
The automatic programme suggests a temperature,
type of heating and cooking time.
▯
For some dishes, you will be required to enter the
weight. It is not possible to set weights outside the
preprogrammed weight range.
▯
For some dishes, you will be asked to enter desired
level of browning, the thickness of the food and/or
the cooking level of the meat or vegetables.
▯
For some dishes, the cooking compartment is
preheated empty. Place the food in the cooking
compartment once the preheating is complete and
a message appears in the display.
▯
Your preferred settings will be shown next time as a
suggestion.
Core temperature probe
For some recipes, you will need the core temperature
probe. Use the core temperature probe for these
"Core temperature probe" on page 21
recipes. ~
Selecting a dish
The following categories are available. One or more
dishes are listed beside each category.
Categories:
▯
Vegetables
▯
Oven dishes
▯
Fish
▯
Meat and poultry
▯
Bread, pizza and cake
▯
Drying
▯
Dough mixture
18
Applying settings for a dish
You are guided through the entire setting process.
Follow the instructions in the display.
Use the rotary selector to scroll through the individual
levels.
Set the function selector to ž.
1
i
2
Touch the
symbol. Press
3
Use the rotary selector to select the category and
™
press
to confirm.
4
Use the rotary selector to select the required dish
™
and press
to confirm.
The possible settings appear in the display. For
many dishes, you can change the settings to suit
your needs.
For some dishes, you must set the weight.
Tip: By pressing the
information about accessories and preparation
methods.
™
5
Press
to confirm the required settings. Follow
the directions in the display.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating.
m
Warning – Risk of scalding!
When you open the appliance door, hot steam may
escape. Open the appliance door with care. Keep
children at a safe distance.
Opening the appliance door affects the cooking result.
Open the appliance door only briefly. The automatic
programme is interrupted and continues to run after
closing the appliance door.
Adding extra cooking time
After the cooking time has ended, you can leave some
dishes to continue cooking if you are not satisfied with
the cooking result.
A query appears in the display asking if you want to
continue cooking.
™
1
Press
to confirm.
2
Select a single or double cooking time, depending
on requirements.
Press I to start.
3
4
If the "Continue cooking" function has ended, turn
the function selector to 0.
Changing and cancelling
After starting the appliance, the settings can no longer
be changed.
If you want to cancel the operation, turn the function
selector to 0.
™
to confirm.
*
symbol, you can receive
Advertisement
Table of Contents
