Siemens Gigaset A580 User Manual page 76

Ending a call
a
Press the End Call key.
Please note
u
You can reject an internal call by pressing the End Call key
sets will continue to signal an internal "group call".
u
If the called handset is not answered, the busy tone sounds after approx.
3 minutes.
Transferring a call to another handset
You can forward (connect) an external call, made via the fixed line network or
VoIP, to another handset.
Prerequisite: You are conducting an external call.
k
Open the list of registered handsets.
s
Select handset or
/ c
Press the Display key or the Talk key.
§OK§
Or:
k
Open the list of registered handsets.
~
Enter the internal number of the handset.
The external participant hears music on hold if activated (
When the internal participant answers:
¤
If necessary announce the external call.
a
Press the End Call key.
The external call is transferred to the other handset.
If the internal participant does not respond or is busy:
¢
Back
§Menu§
Select and press
You are reconnected with the external participant.
You can also press the End Call key a when forwarding a call before the inter-
nal participant picks up the call.
Then, if the internal participant does not answer or the line is busy, the call will
automatically return to you (the display will show Recall).
Initiating internal consultation call, conference call
You are talking to an external participant (via fixed line network or VoIP) and
can call an internal participant at the same time to hold a consultation call.
Prerequisite: You are conducting an external call.
k
Open the list of registered handsets.
s
Select handset or
/ c
Press the Display key or the Talk key.
§OK§
Or:
k
Open the list of registered handsets.
Call all.
.
§OK§
Call all.
Using multiples handsets
a
. Other hand-
£
Page 86).
75