Completing The Voip Settings - Siemens Gigaset A580 User Manual

First steps

Completing the VoIP settings

After the entries have been completed, the handset reverts to idle status.
¤
Test whether your VoIP data is complete and has been stored in the phone
correctly.
Calling via VoIP:
Enter a number using the handset keypad and press and hold the Talk
key c.
If a VoIP connection cannot be established, a corresponding message is shown
in the display.
You can now use your phone to make calls via the fixed line network and the
Internet! Callers can reach you on your fixed line number and your VoIP number.
Please note
u
To ensure that you can always be reached via the Internet, the router must
be permanently connected to the Internet.
u
If you have started the connection wizard via the menu, once the entries
are completed, press and hold the End Call key
idle status.
u
If you try to make a call via a VoIP connection that is not configured cor-
rectly, the following VoIP status message will appear in the display:
VoIP config. error: xxx
their respective meanings are listed on
Please note
You can enter five additional VoIP accounts (VoIP phone numbers) via the Web
configurator later (
number and the Gigaset.net number, your phone can then be reached via up
to eight different phone numbers. You can assign the phone numbers to the
individual handsets that are registered with the base station as send and
receive numbers (
26
Ð V
INT 1
Þ
Menu
(xxx = VoIP status code). The various status codes and
£
Page 106). Together with your fixed line network
£
Page 120).
a
to return the handset to
Page 145.