Siemens Gigaset A580 User Manual page 23

First steps
connection
No
New firmware available
New/improved firmware is available for your phone on the Internet. First per-
form an automatic update of the firmware (
been completed (after approx. 3 minutes) the handset's idle display appears
again and the Message key f flashes. If you press f, the display shown in
the picture above appears and you can start the connection wizard.
Please note
To protect your phone and its system settings from unauthorized access,
please define a 4-digit number code (system PIN) known only to yourself. This
code must be entered before you can register/de-register handsets or alter
your phone's VoIP or LAN settings.
The default system PIN is 0000 (4 x zero). For further information, see
Page 84.
System PIN:
[ _ _ _ _ ]
Ç
Please note
u
You can also call up the connection wizard at any time via the menu
£
( Page
u
The connection wizard will also start automatically if you try to establish a
connection via the Internet before you have made the necessary settings.
Prerequisite: You have not activated the fixed line network connection as
a replacement connection (
22
Start VoIP
wizard?
Yes
appears in the display.
OK
89).
You will see the following display.
¤
Press the key below
screen.
You will be prompted to enter your phone's
system PIN.
£
Page
The active line is marked [----].
¤
Enter your phone's current system PIN
using the keypad.
¤
Press the key below
screen.
The connection wizard is launched.
£
Page 119):
on the display
§Yes§
88). Once the update has
on the display
§OK§