Siemens Gigaset A580 User Manual page 89

Setting the base station via the handset
Prerequisite:
The base station is in idle status, i.e.:
u
No calls are being made via the fixed line network or VoIP.
u
There is no internal connection between registered handsets or to GHC
devices.
u
No other handset has opened the base station menu.
Starting the firmware update manually
¢
§Menu§
Firmware Update
~
The base station is connected to the Internet.
§Yes§
Please note
u
The firmware update can last up to 3 minutes.
u
When updating from the Internet, checks are made to ensure that no newer
version of the firmware exists. If this is not the case, the operation is termi-
nated and a message is issued to that effect.
Automatic firmware update
Your phone will check daily whether a more recent firmware version is available
on the Gigaset configuration server on the Internet. If this is the case, the mes-
sage New firmware available
the Message key f flashes.
f
§Yes§
The firmware will be loaded onto your phone.
If you respond to the prompt with
phone will then remind you again about the firmware update at a later date
(New firmware available
firmware update manually (
Please note
If the telephone is not connected to the Internet at the time when the check
for new firmware is to be carried out (e.g. because the router is deactivated),
the check is carried out as soon as the phone is reconnected to the Internet.
ú You can deactivate the automatic version check via the Web configurator
£
( Page
88
¢
Settings Base
Select and press
§OK§
Enter the system PIN and press
Press the Display key to start the firmware update.
is displayed when the handset is in idle status, and
Press the Message key.
Press the Display key to confirm the prompt.
is displayed again). However, you can also carry out a
£
138).
.
.
§OK§
, the handset changes to idle status. Your
§No§
Page 88).