Querying The Phone Status - Siemens Gigaset A580 User Manual

Setting the phone with the PC
Date and time settings are transferred to every handset after synchronization.
Please note
u
The default time server "europe.pool.ntp.org" will remain stored in the
base station even if you overwrite it. If you delete your time server from the
Time Server
continue to synchronize with the default time server. However, it will no
longer appear in the
u
If you have entered your own time server in the
base station is unable to synchronize for ten consecutive attempts, the base
station will synchronize with the default time server.
u
If you have deactivated synchronization with a time server, and if the date
and time are not set on any handset, then the base station will attempt to
reference date and time settings from the CID information of an incoming
call.

Querying the phone status

General information about your phone is displayed.
¤
In the menu list, select the
The following information is displayed:
Area: IP Configuration
The phone's current IP address within the local network. For information on
IP address
assigning the IP address,
MAC address
The phone's device address.
Area: Software
Firmware version
Version of the firmware currently downloaded. You can download updates of
the firmware to your phone (
the Internet.
EEPROM version
Version of your phone's EEPROM storage chip (
140
field and synchronization is still activated, the base station will
Time Server
Status
£
Page 103.
£
Page
field.
Time Server
tab.
87). Firmware updates are available on
£
Page
field and the
175).