Starting A Firmware Update - Siemens Gigaset A580 User Manual

Area VoIP Status
¤
Select
play.
If you select No, no VoIP status messages are displayed.
¤
Select
Please note
This user guide contains a table with possible status codes and their defini-
£
tions,

Starting a firmware update

If necessary, you can load updates of the base station firmware onto your
phone.
The server on which Gigaset Communications makes new firmware versions
available for your base station is set by default. The URL of the Internet server
is displayed in the
Only change this URL when requested by Customer Care. This address is
also used to load provider information from the Internet. Make sure you write
down the default URL exactly before changing it. Otherwise, you will only be
able to reactivate the default URL by resetting the base station back to the
default settings (
Please note
u
When updating from the Internet, checks are made to ensure that no
newer version of the firmware exists. If this is not the case, the operation
is terminated.
u
The firmware is only loaded from the Internet if you have not entered a
local file in the
Prerequisites:
u
No calls are being made via the fixed line network or VoIP.
u
There is no internal connection between registered handsets or to GHC
devices.
u
The base station menu is not open in any of the handsets.
¤
Open the following Web page:
¤
Select the
The firmware is updated. This process can take up to three minutes.
Please note
You can also start the firmware update on the handset (
Yes after Show VoIP status on handset
Set to save the changes.
Page 145.
Data server
£
Page 85).
User defined firmware file
Update Firmware
to activate the status message dis-
field.
field prior to the update.
¢
Settings Miscellaneous.
button.
Setting the phone with the PC
£
Page 87).
137