Load Analyzer - ABB ACS560 Firmware Manual

No. Name/Value
Class 30
Class 40
36

36 Load analyzer

36.01 PVL signal source
Not selected
Motor speed used
Output frequency
Motor current
Motor torque
DC voltage
Output power
Speed ref ramp in
Speed ref ramp out
Torque ref used
Freq ref used
Process PID out
Other
36.02 PVL filter time
0.00...120.00 s
36.09 Reset loggers
Done
PVL
36.10 PVL peak value
-32768.00...
32767.00
36.11 PVL peak date
1/1/1980...6/5/2159
36.12 PVL peak time
00:00:00...23:59:59
36.13 PVL current at peak
-32768.00...
32767.00 A
Description
Class 30 relay trip class
Class 40 relay trip class
Peak value and amplitude logger settings.
See also section Load analyzer
Selects the signal to be monitored by the peak value logger.
The signal is filtered using the filtering time specified by
parameter 36.02 PVL filter
The peak value is stored, along with other pre-selected
signals at the time, into parameters 36.10...36.15.
The peak value logger can be reset using parameter
Reset loggers. The logger is also reset whenever the signal
source is changed. The date and time of the last reset are
stored into parameters 36.16
None (peak value logger disabled).
01.01 Motor speed used
01.06 Output frequency
01.07 Motor current (page 165).
01.10 Motor torque (page 165).
01.11 DC voltage (page 165).
01.14 Output power (page 166).
23.01 Speed ref ramp input
23.02 Speed ref ramp output
26.02 Torque reference used
28.02 Frequency ref ramp output
40.01 Process PID output actual
Source selection (see Terms and abbreviations
Peak value logger filtering time. See parameter
signal source.
Peak value logger filtering time.
Resets the peak value logger and/or amplitude logger 2.
(Amplitude logger 1 cannot be reset.)
Reset completed or not requested (normal operation).
Reset the peak value logger.
Peak value recorded by the peak value logger.
Peak value.
The date on which the peak value was recorded.
Peak occurrence date.
The time at which the peak value was recorded.
Peak occurrence time.
Motor current at the moment the peak value was recorded.
Motor current at peak.
(page 94).
time.
and 36.17 respectively.
(page 165).
(page 165).
(page 226).
(page 226).
(page 235).
(page 240).
(page 295).
on page 162). -
36.01 PVL
Parameters 291
Def/FbEq16
3
4
Motor current
36.09
0
1
3
4
6
7
8
10
11
13
14
16
2.00 s
100 = 1 s
Done
0
2
0.00
1 = 1
1/1/1980
-
00:00:00
-
0.00 A
1 = 1 A