Care And Maintenance - Securam SCANLOGIC FPC-1808-II-MB Manual

If a mistake is made, wait 30 seconds and then repeat above steps.
LOW BATTERY IS THE MOST COMMON CAUSE OF ELECTRONIC LOCK ISSUES.
Repeated beeping during opening or any other unfamiliar occurrences
indicates that the battery is low and needs to be replaced immediately.
Lost User Code for Electronic Locks
Most safes with electronic locks have their override user code on file at Rhino Metals.
The override user codes are tracked by model and serial number. If user code is lost, a
$25.00 research fee will be assessed for restoring the user code. The request requires
completing and providing proper documentation of ownership of the safe.
Rhino Metals cannot guarantee that Rhino Metals can recover a user code or
responsibility for keeping the information. Please keep user code in a secure place
outside the safe.
IMPORTANT FOR ELECTRONIC LOCKS
♦
DO NOT CLOSE THE SAFE DOOR IF THE USER CODE OR FINGERPRINT DOES NOT
WORK. Refer to the Troubleshooting Guide or call Rhino Metals Tech Support for
further assistance. Do not wait until the safe is locked out.
♦
Store the safe's model, serial number, Owner's Manual, and user code in a
secure location outside the safe.
♦
When a user code is changed, always check to make sure the previous user
code will no longer open the lock.
♦
Replace the battery annually to ensure reliable access into the safe.
♦
Always center the handle or hand wheel with the safe door to ensure that there is
no pressure on the lock as it could cause a lockout.
♦
Consider purchasing an Extended Lock Warranty for extended services.

CARE AND MAINTENANCE

Cleaning the Safe Body
Use a clean and soft cloth (such as a microfiber cleaning cloth) that is slightly
damp with water to clean the exterior of the safe. Take care around the edges
of any logos or pin striping as any pressure could cause damage to them.
Cleaning Safe Locks and Handles
Locks and handles are coated to protect from rust or tarnish. Do not use any
kind of metal polish or harsh cleaning products. Simply wipe off with a soft,
damp cloth. Minor scratches may be touched up with a paint touch up kit
available from Rhino Metals.
Electronic Lock Maintenance
While electronic locks do not need annual maintenance, changing out the
battery once a year is highly recommended to ensure reliable access into the
safe. Rhino Metals recommends using a 9-volt Duracell® or Energizer® alkaline
battery with a "Use Date" of at least four years in the future.