Subscribe to Our Youtube Channel
Related Manuals for Securam SH-WB01
Summary of Contents for Securam SH-WB01
-
Page 1: Table Of Contents
SECURAM EOS Model: SH-WB01 Doc.No.: SH-WB01-20220606 Version No.: V1.02 Date：2022-06-06 Congratulations on your purchase of the SECURAM EOS Wi-Fi Smart Lock! Table of Contents Quick Tour of EOS What’s included in the package Installation Open lock with Administrator Code I. Set Up II. -
Page 2: Quick Tour Of Eos
1. Quick Tour of the EOS The EOS has 9 user capacity (including administrator) o Each user can register up to 2 fingerprints The first User added is the Administrator o Administrator can: Unlock using fingerprint or code ... - Page 3 o Visitors unlocks using fingerprint, code or app, provided the Visitor permission is enabled in app.
-
Page 4: What's Included In The Package
2. What’s included in the package... -
Page 5: Installation
Enter 123456 then button, to open the lock using the default Administrator code. I. Set Up: The easiest way to set up your SECURAM EOS is to follow the voice guidance. Press the Function button to begin: ... -
Page 6: Pair Lock To Securam Guard App And Mobile Device
Note: Owners will be listed as Family in the App. Visitor access may be disabled or restricted in the app. II. Pair Lock to the SECURAM Guard App on your mobile device: The SECURAM Guard app will allow you to manage your EOS Lock. -
Page 7: Masking Codes
0 = Would you like to delete all Visitors? Press plus the button – to delete all Visitors Press – cancel operation Visitor(s) deleted successfully Note: Individual Owners/Visitors can be deleted in the SECURAM Guard App. -
Page 8: Set Volume
Operation Successful VIII. Integrated door sensor The SECURAM EOS is equipped with an optional Integrated Door Sensor to detect door open/closed position. To set up the door sensor, extend the sensor slider from the back of interior assembly. You may need to remove the interior assembly from the door to extend the sensor slider. -
Page 9: Reset To Factory Default
Successful unlocking with a fingerprint during lockout mode will enable to touchpad again. XI. Low Battery Under a low battery conditions, the SECURAM EOS will provide a low battery warning upon code or fingerprint entry. The lock will unlock with the voice warning “Low Battery”, and the low battery indicator flashes red. -
Page 10: Emergency 9V Jumper
XIII. Override Key The SECURAM EOS is equipped with a mechanical override key to open the lock. Insert the key and turn to unlock. To access the keyway, on the area under the touch pad, apply slight pressure on the lower left hand corner. -
Page 11: Specifications
Specifications Input Voltage: 6V - 9V (4 AA batteries) Working Temperature: -10 °C- 60°C 14 °F - 140 °F Working Humidity (max): <95% RH Password Length: 4-8 Digits Safety Information Safety instructions for batteries with battery products: Use Four AA type batteries. ... - Page 12 Clean the device with a dry towel. Warranty SECURAM EOS is protected by a 12-month warranty against Manufacturer’s defects. This warranty is applicable for 12 months from the Date of Manufacture or 12 months from the Date of Consumer Purchase, if the product has been registered for the Consumer Purchase Warranty.
Need help?
Do you have a question about the SH-WB01 and is the answer not in the manual?
Questions and answers