Its signal processing is comparable to that found in high end studio equipment. Most processing is done in full 56-
bit, double precision mode, resulting in very good low level signal performance. The ADAU1701 is a fully program-
mable DSP. The easy to use SigmaStudio+™ software allows the user to graphically configure a custom signal pro-
cessing flow using blocks such as biquad filters, dynamics processors, level controls, and GPIO interface controls.
ADAU1701 programs can be loaded on power-up either from a serial EEPROM through its own self-boot mecha-
nism or from an external microcontroller. On power-down, the current state of the parameters can be written back
to the EEPROM from the ADAU1701 to be recalled the next time the program is run.
Two Σ-Δ ADCs and four Σ-Δ DACs provide a 98.5 dB analog input to analog output dynamic range. Each ADC
has a THD + N of −83 dB, and each DAC has a THD + N of −90 dB. Digital input and output ports allow a
seamless connection to additional ADCs and DACs. The ADAU1701 communicates through an I2C bus or a 4-
wire SPI port.
ADP2360 - 50 mA, 60 V, High Efficiency Buck Regulator
The
ADP2360
is a high efficiency, high input voltage, discontinuous conduction mode (DCM) synchronous, step-
down, dc-to-dc switching regulator. The ADP2360 operates with a wide input voltage supply range from 4.5 V to
60 V and can source up to 50 mA continuous output current, making it ideal for regulating power from a variety of
voltage sources in space-constrained applications. The ADP2360 is available with an adjustable output (0.8 V to
VIN) or in 3.3 V and 5.0 V factory-programmable fixed output voltage models.
BD28623MUV - Class D Speaker Amplifier
The
BD28623MUV
is a Class D Speaker Amplifier designed for Flat-panel TVs in particular for space-saving and
low-power consumption. This IC delivers an output power of 20W+20W.
IM69D120 High Performance Digital MEMS Microphone
IM69D120
is a high performance digital MEMS microphone making use of Infineon's Dual Backplate MEMS
technology to deliver 95dB dynamic range and high output linearity up to 120dBSPL.
LT3502/LT3502A - 1.1MHz/2.2MHz, 500mA Step-Down Regula-
tors in 2mm × 2mm DFN and MS10
The
LT3502/LT3502A
switch, in tiny 8-lead 2mm × 2mm DFN and 10-lead MS10 packages. The wide input voltage range of 3V to 40V
makes the LT3502/LT3502A suitable for regulating power from a wide variety of sources, including 24V industrial
supplies and automotive batteries. Its high operating frequency allows the use of tiny, low cost inductors and capaci-
tors, resulting in a very small solution. Constant frequency above the AM band avoids interfering with radio recep-
tion, making the LT3502A particularly suitable for automotive applications. Cycle-by-cycle current limit and
EVAL-AD2437B1MZ Manual
are current mode PWM step-down DC/DC converters with an internal 500mA power
ADP2360 - 50 mA, 60 V, High Efficiency Buck Regulator
2–5
Need help?
Do you have a question about the EVAL-AD2437B1MZ and is the answer not in the manual?
Questions and answers