Table of Contents
Advertisement
INSTALLATION AND OPERATION MANUAL
» Press the upgrade button and you should see a prompt confirming the upgrade to continue.
Select Yes:
» The following screen will now show reminding the user to not reboot during an upgrade
process. This screen should render for at least 60 seconds if the PC browsing to this particular
node is locally connected.
NOTE: If a firmware upgrade is being performed on a node connected on the remote end of
a wireless connection, it may take several minutes for this screen to clear as the link
needs to re-establish and connections to restart. One may have to clear ARP cash on the
connected PC by issuing arp –d command at the command prompt.
TECH SUPPORT: 1.888.678.9427
NW3/NW4
INS_NW(3,4)_REV– 06/10/13 PAGE 39
Advertisement
Table of Contents
Need help?
Do you have a question about the netwave NWK3 AP and is the answer not in the manual?