Figure 4-11. Isbm Section Input Power Terminal Detail - Continuous Static Switch - Eaton Power Xpert 825/550 Installation And Operation Manual

UPS SYSTEM INSTALLATION
UPM 1 Cable 1G1 & 1G2 Brown
Phase B (E2A)
UPM 4 (FI-UPM)
UPM 4 (FI-UPM)
UPM 1 Cable 1G1 & 1G2 Yellow
Phase C (E3A)
UPM 2 Cable 2G1 & 2G2 Yellow
UPM 3 Cable 3G1 & 3G2 Yellow
(Not used with Two UPM systems.)
NOTE Two cable lugs will be connected to each terminal stud. When connecting the cable lugs, install the first lug on the stud with the raised
barrel portion facing the back of the cabinet. Install the second lug with the raised barrel portion facing the front of the cabinet.
t
4-14
Power Xpert 9395 UPS (450–825 kVA) Installation and Operation Manual
Figure 4‐11. ISBM Section Input Power Terminal Detail – Continuous Static Switch
UPM 4 (FI-UPM)
UPM 1 Cable 1G1 & 1G2 Orange
UPM 2 Cable 2G1 & 2G2 Orange
UPM 3 Cable 3G1 & 3G2 Orange
(Not used with Two UPM systems.)
UPM 2 Cable 2G1 & 2G2 Brown
UPM 3 Cable 3G1 & 3G2 Brown
(Not used with Two UPM systems.)
AC Input to UPMs
S
www.eaton.com/powerquality
164201725 Rev 9
Phase A (E1A)
Phase B (E2A)