Table of Contents
Advertisement
TX Exp Series RFID | Barcode Label Printer User's Manual
Chapter 3: Operations and Settings
3.2.3.3 Calibration
On the LCD touchscreen, select "Settings" > "RFID" to enable the RFID
function, and then
select "Calibration" to enter the Calibration menu, as shown in Figure 3-22.
Figure 3-22 Calibration Menu
Perform the RFID calibration to detect the optimal read/write position of the RFID tag.
RFID only: Press "RFID only" to directly perform RFID calibration only.
Media & RFID: Press "Media & RFID" to calibrate the media sensor first and then perform the
RFID calibration.
58
Advertisement
Table of Contents
Need help?
Do you have a question about the TX Exp Series and is the answer not in the manual?