System Information - Danfoss DHP-H Varius Pro+ Manual

Commissioning
Symbol
N
Symbol Description
Operating mode Heat production. Space heating is permitted.
Operating mode Hot tap water. Hot tap water production is permitted.
7.4

System information

Check applicable operating data described in the tables below. The information can be found in the sub-menu System information
Select System information on the Menu screen:
1. Press on the Start screen to open the Menu screen.
2. Press System information
Operating data
Sensor
Outdoor
System supply line
Desired supply line
Hot water
28
DHP-H Varius Pro+/DHP-L Varius Pro+
Description
Operating mode On. All activated functions are on.
In this operating mode, functions enabled in Settings can be switched activated or deactiva-
ted.
Press to go to page 2 where functions can be activated/deactivated.
See the example in the table below.
Operating mode On. All activated functions are on.
In this operating mode, functions enabled in Settings can be switched activated or deactiva-
ted.
Immersion heater enabled but not activated.
Press to go to page 2 where functions can be activated/deactivated.
See the example in the table below.
The list below shows examples of selected functions on page 2 in Op-
erating mode.
Functions not activated from factory must be enabled in Settings be-
fore they can be activated and used.
Explanation
Shows the temperature on the outdoor sensor.
Optional. Depending on system application.
Shows the calculated requirement value for the supply line.
Shows the temperature of the hot water sensor, if hot water production is permitted.
VIJSG202 Danfoss Heating Solutions