Danfoss DHP-H Varius Pro+ Manual page 25

Commissioning
6.1.3 Testing the compressor
1. Enable the compressor by pressing
2. Set compressor gear.
3. Check that there is no abnormal noise.
4. Check that the pressure pipe becomes hot.
5. Stop the compressor by pressing
6.1.4 Exiting manual test
To exit manual test:
1. Press on the Start screen to open the Menu screen.
2. Press on Settings
.
3. Press to go to the menu page for Manual test.
4. Press on the text Manual test.
5. Press to exit manual test.
The symbol disappears.
6.1.5 Insulating pipes
When the manual test is completed, a check for leaks should be carried out. When the leakage check has been successfully completed,
the pipes should be insulated.
Ensure that the pipes which transport cold water are properly insula-
Caution
ted to prevent condensation damage.
Danfoss Heating Solutions
DHP-H Varius Pro+/DHP-L Varius Pro+
(manual enable).
(manual enable).
VIJSG202
25