Link/Data Receiving And Sending Command; Restore Factory Setting; Quick Start; Default Parameter - Ebyte E180-DTU User Manual

Chengdu Ebyte Electronic Technology Co.,Ltd

3.3.9 Link/Data receiving and sending command

Link indicates network connection state. In TCP mode, Link is off when the network is not connected. When the
connection is established, Link is always on. The Link indicator is always on in UDP mode.
The other is a data transmission indication, which shows the transmission state of DTU. When there is no data
transmission on DTU, the data transmission indicator is off. When there is data transmission on DTU, the flashing indicates
that its period is 60ms and the indicator is on for 10ms.

3.3.10 Restore factory setting

DTU restore factory setting has two ways: software to restore the factory settings and press the button to restore the
factory settings.

4. Quick start

4.1 Default parameter

IP acquisition type
IP Address
Subnet mask
Gateway
DNS
Spare NDS
Socket A1 basic parameters
Socket A1 heartbeat packet mode
Socket A1 heartbeat packet content
Socket A1 registration packet mode
Socket A1 registration packet time
Socket A1 registration packet content
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
STATIC
192.168.4.101
255.255.255.0
192.168.4.1
61.139.2.69
192.168.4.1
TCPS,192.168.4.101,8886
NET
0（Sec），Turn off heartbeat packet function
heartbeat msg
OFF
regist msg
E180-DTU(ZG120-ETH)User Maunel