Hot-Swapping Hard Disk Drives; Determining Drive Status - MAXDATA PLATINUM 9000-4R Product Manual

Hot-swapping Hard Disk Drives

The procedures in this section describe how to determine drive status, remove a faulty drive, and
install a new drive.

Determining Drive Status

The carriers contain light-pipes that allow dual color LED indicators to show through the bezel to
display hard disk drive status as described in Table 29.
Table 29. SCSI Drive Status LED Descriptions
Feature
Green, flashing
Yellow/Green flashing
Yellow/Blank flashing
Not illuminated
MAXDATA PLATINUM 90004R Server System
B
A
D
Figure 61. System Fan Location and Removal
A. and B. 120 x 38 mm System Fans
C. and D. 120 x 25 mm System Fans
Description
Indicates the hard drive is active
Indicates a hard drive fault status and hard drive is active
Indicates a hard drive fault status
Hard drive is powered
C
OM12891
137