Removing The Rear Panel; Installing The 35 Mm Din Clip - Patton CopperLink 1101E User Manual

CopperLink Line Power 1101E PoE Extender User Manual
2. Install the 35mm DIN clip onto the rear panel using the self-tapping screws (included in the installation
kit package) as shown in
3. Install the rear panel onto the CL1101E enclosure using the screws removed in step 1 as shown in
on page 22.
Installing accessories
Figure 7. Removing the rear panel
figure 8.
Figure 8. Installing the 35 mm DIN clip
2 • Installation
figure 9
21