—This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial or residential environment. REGULATORY MODEL NUMBER: 03340D4-001 Sales Office: +1 (301) 975-1000 Part Number: 07MCL1314R-QS, Rev. A Technical Support: +1 (301) 975-1007 E-mail: support@patton.com Revised: July 12, 2012 WWW: www.patton.com...
Page 2
• Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power adapter, line voltages are present within the device when the power WARNING cord is connected. • For devices with an external power adapter, the power adapter shall be a listed Limited Power Source The mains outlet that is utilized to power the device shall be within 10 feet (3 meters) of the device, shall be easily accessible, and protected by a circuit breaker in compli-...
1.0 Configure the DIP Switches To use DIP-switch configuration, you must first set the DIP switches to a position other than all OFF or all ON before powering-up the CopperLink. To configure your CL1314R using the DIP switches, refer to the section enti- tled “Hardware (DIP-switch) configuration”...
2.3 Power up indication Verify that the Power LED on the front panel illuminates and remains lit. CopperLink™ Line Interface Power LED Line Link LED Ethernet Port 1 Ethernet Port 0 Ethernet Port 0 Link LED Ethernet Port 1 Link LED Reset button CL1314R front panel Figure 3.
5.0 Additional information For detailed information about installing, configuring, and operating the CopperLink, refer to the CopperLink Model 1314R User Manual at www.patton.com/manuals/CL1314R.pdf. A.0 Compliance Information A.1 Compliance EMC: FCC Part 15, Class A • EN55022, Class A • EN55024 •...
Die Sicherheitshinweise in der mitgelieferten Produktdokumentation sind zu beachten. Die Konformität mit der oben erwähnten Richtlinie wird durch das CE-Zeichen auf dem Gerät bestätigt. Die unterzeichnete Konformitätserklärung kann heruntergeladen werden von: www.patton.com/ certifications/. A.5 Authorized European Representative D R M Green European Compliance Services Limited.
Trademarks statement The term CopperLink is a trademark of Patton Electronics Company. All other trademarks presented in this docu- ment are the property of their respective owners. Patton support headquarters in the USA Online support: Available at www.patton.com...
Need help?
Do you have a question about the CopperLink 1314R and is the answer not in the manual?
Questions and answers