Table of Contents
Advertisement
CopperLink Line Power 1101E PoE Extender User Manual
WARNING
CAUTION
In accordance with the requirements of council directive 2002/
96/EC on Waste of Electrical and Electronic Equipment
(WEEE), ensure that at end-of-life you separate this product
from other waste and scrap and deliver to the WEEE collection
system in your country for recycling.
This device contains no user serviceable parts. This
device can only be repaired by qualified service personnel.
Electrostatic Discharge (ESD) can damage equipment and
impair electrical circuitry. It occurs when electronic printed cir-
cuit cards are improperly handled and can result in complete or
intermittent failures. Do the following to prevent ESD:
•
Always follow ESD prevention procedures when removing
and replacing cards.
•
Wear an ESD-preventive wrist strap, ensuring that it makes
good skin contact. Connect the clip to an unpainted surface of
the chassis frame to safely channel unwanted ESD voltages
to ground.
•
To properly guard against ESD damage and shocks, the wrist
strap and cord must operate effectively. If no wrist strap is
available, ground yourself by touching the metal part of the
chassis.
About This Guide
10
Advertisement
Table of Contents
