—This is a Class A device and is intended for use in a light industrial environment. It is not intended nor approved for use in an industrial or residential environment. REGULATORY MODEL NUMBER: 03340D4-001 Sales Office: +1 (301) 975-1000 Part Number: 07MCL1314-QS, Rev. A Technical Support: +1 (301) 975-1007 E-mail: support@patton.com Revised: April 24, 2012 WWW: www.patton.com...
Page 2
• Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power adapter, line voltages are present within the device when the power WARNING cord is connected. • For devices with an external power adapter, the power adapter shall be a listed Limited Power Source The mains outlet that is utilized to power the device shall be within 10 feet (3 meters) of the device, shall be easily accessible, and protected by a circuit breaker in compli-...
1.0 Configure the DIP Switches To use DIP-switch configuration, you must first set the DIP switches to a position other than all OFF or all ON before powering-up the CopperLink. To configure your CL1314 using the DIP switches, refer to the section enti- tled “Hardware (DIP-switch) configuration”...
10/100Base-T device or network. You may connect this port to a hub or PC using a straight through or crossover cable that is up to 328 ft long. 5.0 Additional information For detailed information about installing, configuring, and operating the CopperLink, refer to the Model 1314 User Manual at www.patton.com/manuals/CL1314.pdf. CopperLink Model 1314 Quick Start Guide...
The safety advice in the documentation accompanying the products shall be obeyed. The conformity to the above directive is indicated by the CE sign on the device. The signed Declaration of Conformity can be downloaded from www.patton.com/certifications/. CopperLink Model 1314 Quick Start Guide...
Die Sicherheitshinweise in der mitgelieferten Produktdokumentation sind zu beachten. Die Konformität mit der oben erwähnten Richtlinie wird durch das CE-Zeichen auf dem Gerät bestätigt. Die unterzeichnete Konformitätserklärung kann heruntergeladen werden von: www.patton.com/ certifications/. A.5 Authorized European Representative D R M Green European Compliance Services Limited.
Trademarks statement The term CopperLink is a trademark of Patton Electronics Company. All other trademarks presented in this docu- ment are the property of their respective owners. Patton support headquarters in the USA Online support: Available at www.patton.com...