History; Device Settings; Language; Clock - Bender ISOMETER isoRW685W Manual

Settings
9.2

(4.0) History

In the history menu, the faults detected by the ISOMETER® are displayed.
Overview of faults that have occurred.
•History
Reset the history memory.
•Delete
9.2

(5.0) Device settings

Basic settings of the ISOMETER®.
9.2

(5.1) Language

Selecting the display language:
Deutsch Espanol
English (GB) Francais
9.2

(5.2) Clock

Setting the time and date display format.
9.2

(5.2.1) Time

Setting the time format to 24 hours or 12 hours am/pm.
9.2

(5.2.2) Format (time)

Selecting the appropriate time format to be displayed:
12-hour notation am/pm
•12 h
24-hour notation
•24 h
9.2

(5.2.3) Summer time

Summer time can be considered in the following settings:
No automatic change between summer time and standard time.
•off
Daylight Saving Time
•DST
Automatic time change according to North American regulation.
Start: Second Sunday in March from 02:00 a.m. to 03:00 a.m. (local time)
End: First Sunday in November from 03:00 a.m. to 02:00 a.m. (local time)
Central European Summer Time
•CEST
Automatic time change according to Central European regulation.
Start: Last Sunday in March from 02:00 a.m. CET to 03:00 a.m. CEST.
End: Last Sunday in October from 03:00 a.m. CEST to 02:00 a.m. CET.
9.2

(5.2.4) Date

Entering the current date based on the time format.
35
Norsk Portugues
Polski
Settings
9.2

(5.2.5) Format (date)

Select the date format that you want to be displayed:
day, month, year
•dd.mm.yy
month, day, year
•mm-dd-yy
9.2

(5.2.6) NTP

Select whether you would like to synchronise the current time via NTP. To use this func-
tion you must configure the NTP server
Synchronisation via NTP server is activated.
•on
Synchronisation via NTP server is deactivated.
•off
9.2

(5.2.7) NTP server

Set the IP address of the NTP server.
9.2

(5.2.8) UTC

Set the time according to UTC (coordinated world time). For Germany, set +1 for winter-
time (CET) and +2 for summer time (CEST).
9.2

(5.3) Interface

Menu for connecting and parameterising other devices to the ISOMETER.
9.2

(5.3.1) Write access

Set whether the device can be parameterised externally via Modbus or web server. Dis-
playing and reading out data via Modbus and web server is always possible, regardless of
this setting.
Allow external parameter setting.
•Allow
•Deny Refuse external parameter setting.
9.2

(5.3.2) Ethernet

Set the parameters for communication with other devices via the Ethernet interface. The
Ethernet interface can be used for communication with Modbus, web server and BCOM.
Entering a DHCP server
1. DHCP:
Entering an IP address
2. IP:
Entering a subnet mask
3. SN:
Entering a standard gateway
4. Std.GW:
Entering a DNS server
5. DNS:
Entering a domain name
6. Domain
.
isoRW685W-D_D00178_04_M_XXEN/02.2019