Table of Contents
Advertisement
Bumper Strobe
Button
1. Static mode
01) Press the
button to switch all the LEDs ON.
02) Press the
button to switch all the LEDs OFF.
2. Strobe mode
01) Press one of the
are: R - fast, G - normal, B - slow.
02) Press the
button to deactivate the strobe and switch the device to static mode.
03) Press the
button to switch OFF all the LEDs.
Maintenance
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by an expert after every year in the course of an acceptance test.
The operator has to make sure that safety-related and machine-technical installations are to be
inspected by a skilled person once a year.
The following points have to be considered during the inspection:
01) All screws used for installing the device or parts of the device have to be tightly connected and
must not be corroded.
02) There may not be any deformations on housings, fixations and installation spots.
03) Mechanically moving parts like axles, eyes and others may not show any traces of wearing.
04) The electric power supply cables must not show any damages or material fatigue.
The Bumper Strobe requires almost no maintenance. However, you should keep the unit clean.
Otherwise, the fixture's light output will be significantly reduced. Disconnect the mains power supply, and
then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and
a soft cloth. Do not use alcohol or solvents.
The front lens will require weekly cleaning, as smoke-fluid tends to build up residues, reducing the light-
output very quickly.
Please clean internal components once a year with a light brush and vacuum cleaner.
Ordercode: 30873
Function
Blackout
Strobe speed
Full on
buttons to choose the desired strobe frequency. The available options
10
Description
Switch the LEDs OFF
Choose the strobe speed: fast, normal, slow
Switch the LEDs to FULL ON
Advertisement
Table of Contents
