Parts And Service; Parts And Service Information - Peco 23621209 Operator's Manual

Hide thumbs

Table Of Contents

Table of Contents

safety decals. Replace any missing or illegible decals.

2. Inspect the unit for worn or damaged components.

Repair or replace before the next use. Any

replacement component installed during repair shall

include the component's current safety decal specified

by the manufacturers to be affixed to the component.

3. Check belt for proper tension.

4-2 Lubrication

NOTE: Use only white lithium based grease for

lubrication of the shaft on the blower assembly.

1. On initial use: Grease the fitting on the blower shaft.

2. Every 25 hours of use: Re-grease the grease fitting.

3. Every 200 hours of use: Check oil levels in gear box.

Oil in gear box should cover the gears. If not, fill using

an EP90 weight oil. 6oz. will fill the gear box from

empty.

Unit Model Number:_________________________________

Unit Engine Size: __________________________________

Unit Serial Number: _______________________________

Date of purchase: _____/_____/_________

Dealer/Distributor Name: _________________________________________

Address: ___________________________________ State:___________ Zip:____________

Phone Number: ____________________________

Phone #: (828) 684-1234 or Toll Free: (800) 438-5823

5-1 Parts And Service Information

PECO collection system owners should record the name

and telephone number of their Service Center. Your

Service Center will be happy to supply replacement

parts, accessories, and do any service or repairs to your

collection system. If for any reason your Service Center

is unable to service your collection system or supply

replacement parts, contact PECO and include the

following information on the chart below.

THE SERIAL NUMBER PLATE IS LOCATED ON THE

Address: PECO Inc.

100 AIRPORT ROAD

Arden, NC 28704

Email: peco@lawnvac.com

SECTION V