Table of Contents
Advertisement
24. How to adjust the pedal variable resistor
The variable resistor of the pedal can be adjusted by depressing the pedal or inputting a pedal variable
resistor value on the operation panel.
1) Calling the pedal variable resistor
adjustment screen.
Select the pedal variable resistor adjustment from
the menu shown on the mode screen and press
EDIT key ❽
to display the pedal variable
resistor adjustment screen A.
2) Selecting the destination of
registration of the pedal variable
resistor value.
When ITEM SELECT key ❻
the destination of registration of the current pedal
variable resistor value is changed and displayed
in reverse video successively. Select the target
destination of registration. The destination can be
selected from the five ones shown in the table at
the right.
3) Registering the pedal variable resistor
value.
Press EDIT key ❽
the pedal variable resistor value on the selected
destination of registration.
When you press DATA CHANGE key ❼
during the selection of the registered pedal vari-
able resistor value, you can modify the value. The
modifiable range of the pedal variable resistor val-
ue is from 0 to 255.
is pressed,
to register and display
– 61 –
A
Display
Status of pedal to be registered
Pedal is fully depressed
Pedal is depressed to the neutral
position
Pedal is lightly depressed
Pedal is not depressed
Back part of the pedal is depressed
❽
❻
❼
Advertisement
Table of Contents
