Table of Contents
Advertisement
No.
S060
ACT timing adjustment at the start of right
overedging
This item adjusts needle thread tension output start
timing at right overedging section.
ACT timing adjustment at the start of 2nd
S061
bar-tacking
This item adjusts needle thread tension output start
timing at 2nd bar-tacking section.
Number of stitches of tie stitching at the
S062
start of sewing
This item sets number of stitches of tie stitching at
the start of sewing.
S063
Sewing pitch of tie stitching at the start of
sewing
This item sets sewing pitch pf tie stitching at the
start of sewing.
Tie stitching width at the start of sewing
S064
This item sets tie stitching width at the start of sew-
ing.
Lengthwise compensation of tie stitching
S065
at the start of sewing
This item sets start position of tie stitching in length-
wise direction at the start of sewing.
S066
Crosswise compensation of tie stitching at
the start of sewing
This item sets start position of tie stitching in cross-
wise direction at the start of sewing.
Tie stitching width at the end of sewing
S067
This item sets tie stitching width at the end of sew-
ing.
S068
Number of stitches of tie stitching at the
end of sewing
This item sets number of stitches of tie stitching at
the end of sewing.
Lengthwise compensation of tie stitching
S069
at the end of sewing
This item sets start position of tie stitching in length-
wise direction at the end of sewing.
Crosswise compensation of tie stitching at
S070
the end of sewing
This item sets start position of tie stitching in cross-
wise direction at the end of sewing.
S081
Knife motion
This item sets "With/without motion" of normal cloth cutting knife.
: Normal knife
motion OFF
S083
Knife motion at 1st cycle of double stitching
This item sets "With/without motion" of cloth cutting knife at 1st
cycle when double stitching is performed.
: Normal knife
motion OFF
*1 : Displayed according to the shape
*2 : Displayed when it is set to with edit. Refer to
*3 : Displayed when the function is selected.
Item
: Normal knife
motion ON
: Normal knife
motion ON
"V-12. Method of setting sewing data with/without edit"
– 42 –
Setting range
Edit unit
-5 to 5
1 stitch
-5 to 5
1 stitch
0 to 8
1 stitch
0.00 to 0.70
0.05 mm
0.0 to 3.0
0.1 mm
0.0 to 5.0
0.1 mm
0.0 to 2.0
0.1 mm
0.1 to 1.5
0.1 mm
0 to 8
1
0.0 to 5.0
0.1 mm
0.0 to 2.0
0.1 mm
–
–
–
–
Remarks
*2
*2
–
*2
–
*2
*2
–
–
*2
*2
–
*2, *3
p.37.
Advertisement
Table of Contents
