Table of Contents
Advertisement
5. Thread tension
❶
❸
❷
❷
❶
– 75 –
(1) Thread take-up spring (purl stitch)
1) The thread take-up amount of thread take-up
spring ❶ is 8 to 10 mm, and the appropriate
pressure at the start is approximately 0.06 to
0.1N.
2) To change the stroke of the thread take-up
spring, loosen screw ❷ , insert a thin screwdriver
into the slot of thread tension post ❸ , and turn it.
3) To change the pressure of the thread take-up
spring, insert a thin screwdriver into the slot of
thread tension post ❸ while screw ❷ is tight-
ened, and turn it. Turning it clockwise will in-
crease the pressure of the thread take-up spring.
Turning it counterclockwise will decrease the
pressure.
(2) Adjusting the thread take-up amount of the
thread take-up lever
The thread take-up amount of the thread take-up
lever should be adjusted in accordance with the
thickness of the sewing products so as to obtain
well-tightened stitches.
a. For heavy-weight materials, loosen setscrew ❷
in thread guide ❶ , and move the thread guide to
the left. The thread take-up amount of the thread
take-up lever will be increased.
b. For light-weight materials, move thread guide ❶
to the right. The thread take-up amount of the
thread take-up lever will be reduced.
Advertisement
Table of Contents
