Ftp - D-Link DCS-5010L User Manual

Section 4 - Configuration
This section allows you to configure your camera to send snapshots and video clips to an FTP server.
Host Name: Enter the IP address of the FTP server that you will be connecting to.
Port: Enter the port number of the FTP server that you will be connecting to.
User Name: Enter the User Name for your FTP server account.
Password: Enter the Password for your FTP server account.
Path: Enter the destination path/folder to save files to on the FTP server.
Passive Mode: Click Yes to enable passive mode if your camera is behind a router
protected by a firewall.
Enable
Check the box to enable uploading of snapshots to an FTP server.
uploading of
Images will be uploaded as specified below:
images to an
FTP server: • Click Always to upload snapshots continuously based on the
Image Frequency specified.
• Click Schedule to set a schedule for starting and stopping the
uploading of snapshots.
• Select Motion Detection if you would like the camera to upload
images only when motion is detected.
Image
Set how frequently you want images to be taken and uploaded. You
Frequency:
can specify a number of frames per second, and a number of seconds
per frame.
Base File Name:
Enter the desired base file name for your snapshots. Keep in mind
that the base file name will also include the time stamp information.
D-Link DCS-5010L User Manual

FTP

40 40