Wireless Setup - D-Link DCS-5010L User Manual

Section 4 - Configuration
This section allows you to set up and configure the wireless settings on your camera.
Enable
Check this box to allow your camera to connect to your network
Wireless:
wirelessly.
SSID:
Enter the network name (SSID) of the wireless network you want to
connect to. You can also click the Site Survey button below to choose
an available network and fill in settings automatically.
Channel: If you are using Ad-Hoc as your connection mode, select the same
channel that is being used by your wireless network.
Connection
Select the connection mode used by your wireless network. In most
Mode: cases, you should select Infrastructure. Ad-Hoc is only used if your
camera is directly connecting to another PC or device without the use
of a router or access point.
Site Survey:
Clicking this button will allow you to select an available wireless
network to connect to, and will fill in the necessary settings for you.
Wireless
Select the wireless security mode used by your wireless network. If
Security Mode: you select WPA-PSK/WPA2-PSK, enter the password for your wireless
network in the text box that appears.
Click Save Settings.
D-Link DCS-5010L User Manual

Wireless Setup

32 32