Features - D-Link DCS-5010L User Manual

Section 1 - Product Overview

Features

Easy to Use and mydlink-Enabled for Easy Access and Management
The DCS-5010L is a stand-alone surveillance camera that requires no special hardware or software, and can operate independently, even without a
PC. This camera is also mydlink-enabled, which means you can view and manage your camera through the mydlink website, or through the mydlink
mobile app for iOS and Android mobile devices.
Pan/Tilt for Wide Viewing Area
Patrol a large area with one camera thanks to the DCS-5010L's pan and tilt functions. You can use the Web interface to manually adjust the camera
lens position, or set up to 24 pre-defined preset positions, enabling you to quickly move to frequently used points of interest.
IR LEDs for Day and Night Functionality
The built-in infrared LEDs enable nighttime viewing of up to 26 feet (8 meters), giving you clear images regardless of lighting conditions.
H.264 Codec for Smooth, Space-Efficient Video
This camera supports use of the H.264 video codec, which gives you high-quality video with reduced bandwidth requirements. This means that
you can enjoy smoother, more reliable video streaming over the Internet, and less disk space is required to save recordings.
Motion Triggered Notifications and Recordings
The DCS-5010L can send e-mail notifications with snapshots or video clips whenever motion is detected. You can designate areas to monitor for
motion, allowing you to keep watch over specific areas of interest. The DCS-5010L can also upload images to an FTP server whenever motion in
these areas is detected.
802.11g/n Wireless or Ethernet/Fast Ethernet Support
The DCS-5010L offers wireless 802.11g/n and Ethernet/Fast Ethernet connectivity, making it easy to integrate into your existing network environment.
The DCS-5010L works with either a 10 Mbps Ethernet-based network or 100 Mbps Fast Ethernet-based network for traditional wired environments,
and works with 802.11g/n wireless routers or access points for added flexibility. The Site Survey feature also allows you to view and connect to any
available wireless networks within range of the camera.
Remote Monitoring Utility
The D-ViewCam application adds enhanced features and functionality to the DCS-5010L, and allows you to create a full surveillance system for up
to 32 cameras. With D-ViewCam, you can view multiple cameras at the same time, record video, and set up scheduled and triggered recordings.
D-Link DCS-5010L User Manual 10