Time And Date - D-Link DCS-5010L User Manual

Section 4 - Configuration
This section allows you to configure the settings of the internal system clocks for your camera.
Current Time: Displays the current date and time.
Time Zone: Select the Time Zone for your region from the drop-down menu.
Synchronize Enabling this option will allow the camera to update its system clock
NTP Server: automatically from an NTP server.
NTP Server When Synchronize NTP Server is enabled, you can select the NTP Server
Used: closest to you from the drop-down menu.
Daylight Click to enable Daylight Saving Time (DST). If DST is enabled, you can
Daving: select an Offset using the drop-down menu, or enter a Start and End
date with the Month, Week, Day of Week, and Time.
Set the Date When Synchronize NTP Server is disabled, you can set the date and
and Time time of the internal system clock manually. Or you can click Copy
Manually: Your Computer's Time Settings to automatically set the date and
time based on your computer's settings.
Click Save Settings.
D-Link DCS-5010L User Manual

Time and Date

42 42