Camera User Manual
Step 3 Set the parameters according to Table 11-3.
Parameter
SD Card
Disk ID
Total Space(MB)
Alarm Threshold
(1-100)
Step 4 Click Apply.
The message "Apply success!" is displayed, and the system saves the settings.
-----End
11.2.2 Configure the FTP
Procedure
Step 1 Choose Configuration > Device Record > Record Directory.
Step 2 Choose FTP, click Modify.
The FTP Record Path Modify page is displayed, as shown in Figure 11-5.
Issue V1.0 (2023-02-10)
SD card Record Path Modify page
SD card recording parameters
Description
Enable SD card to enable record.
ID of SD card.
Total disk space read
automatically.
The camera will alarm when
used Space achieves the alarm
threshold.
Configure the Recording Function
Setting
[Setting method]
Click button to enable SD card.
N/A
[Setting method]
The parameter cannot be set manually.
[Setting method]
Enter a value from 1-100.
123