D-Link DCS-5010L User Manual page 41

Section 4 - Configuration
File:
Select how you want uploading of snapshots to be handled:
• Overwrite will replace the old snapshot with the new one. This
means you will only have the most recent one, which is updated
every time a new one is taken.
• Date/Time Suffix will add the date and time to the end of the
snapshot file name. You can also create subfolders based on a
period of time you specify to help you organize your snapshots.
• Sequence Number Suffix Up to will add a number to the end of
the snapshot file name up to the number you specify, after which
the oldest files will be overwritten.
Enable
Check the box to enable uploading of video clips to an FTP server.
uploading of
Video clips will be uploaded as specified below:
video clip to an
FTP server: • Click Always to upload video continuously, based on the Video
Limit specified below.
• Click Schedule to set a schedule for starting and stopping the
uploading of video clips.
• Click Motion Detection if you would like the camera to upload
video clips only when motion is detected.
File Name
Enter the prefix of the base file name for your video clips. Keep in mind
Prefix:
that the base file name will also include the time stamp information.
Video Limit:
Specify the maximum file size (in KBytes) and duration (in seconds)
of the video clips to be uploaded.
Test FTP Server: Click Test to send a test files to the FTP server specified above to make
sure that your settings are correct.
Click Save Settings.
D-Link DCS-5010L User Manual 41 41