Mail - D-Link DCS-5010L User Manual

Section 4 - Configuration
This section allows you to configure your camera to send snapshots and video clips to an e-mail address. If you are not sure what settings to use,
check with your e-mail provider (e.g., Gmail, Yahoo Mail, etc.)
SMTP Server Enter the domain name or IP address of your external e-mail server.
Address:
SMTP Server Enter the port number for the SMTP Server. The default value is 25,
Port: and should only be changed if suggested by your e-mail provider.
Sender E-mail Enter the e-mail address to be listed as the sender for your notification
Address: e-mails.
Receiver E-mail Enter the e-mail address that your notification e-mails will be sent to.
Address:
User Name: If the SMTP server uses authentication, enter your User Name.
Password: If the SMTP server uses authentication, enter your Password.
Use SSL-TLS/
Select a protocol for security. For example, if you want to use Gmail
STARTTLS:
with SSL-TLS for e-mail notifications, you can follow the steps below:
Step 1 - Enter smtp.gmail.com in the SMTP Server Address field.
Step 2 - Change the SMTP Server Port number from 25 to 465.
Step 3 - Enter your Gmail e-mail address in Sender E-mail Address.
Step 4 - Enter the destination e-mail address in Receiver E-mail Address.
Step 5 - Enter the User Name required to access the SMTP server.
Step 6 - Enter the Password required to access the SMTP server.
Step 7 - Select SSL-TLS and then click Save Settings.
Step 8 - Click the Test button to send a test e-mail to the account
listed above.
Note:
• You can also use STARTTLS, which will use SMTP server port number 587.
• If you want to use a Yahoo SMTP server, the SMTP server address will
be different between each registered region, and only SMTP port 465 is
supported for SSL-TLS.
D-Link DCS-5010L User Manual

Mail

38 38